2000 Toyota Crown Majesta – 2JZ-FSE 3.0L, RWD, 5-Speed Automatic, 40,540 Miles
How We Prepared This Vehicle
Everything below was done on this exact vehicle before it was offered for sale. Mechanical work was done at our prep station in Toyama, Japan; detail, Florida title and the final road test at our location in Holiday, Florida.
Replaced
- Engine oil and filter, grade matched to Florida climate and engine mileage
- Coolant
- Brake fluid
- Spark plugs
- Engine air filter
- Cabin air filter
- New battery
- Tires
Performed
- Wheel alignment
- Wheel balancing
- Tire pressure set for this wheel and tire size
- Wheels torqued with a calibrated wrench
Additional care
- Full interior disassembly and deep clean
- Ozone treatment against odors
- Engine bay rubber and plastic protection
- Stored with a full tank against fuel tank corrosion
- Driven regularly while on our lot, any new issue is fixed
Upgrades and extra work
- Work XS1 wheels with Bridgestone tires mounted
Inspected and passed
- Clean cold start and steady idle, no abnormal exhaust smoke
- No oil or coolant leaks
- No engine or transmission mount vibration
- No overheating under load
- Smooth shifts, no slipping
- Brake pads and rotors within spec, no rotor runout
- No seized calipers, parking brake works
- No worn bushings, leaking shocks or steering play
- No torn CV boots or noisy wheel bearings
- Tires under 6 years old, no dry rot
- Alternator charging and battery in good health
- No battery drain
- OBD scan clear of fault codes
- No exhaust or vacuum leaks on smoke test
- No A/C leaks on vacuum test
- All lights, signals, gauges and warning lights work
- Horn, locks, windows, wipers and every other function work
- Even panel gaps, glass checked
- No water leaks into the cabin
- Underbody and frame checked for rust; any rust is shown in the listing
- Road test, about 300 miles (480 km) on average, issues fixed before listing
The Crown Majesta is not a Crown with a higher trim level. It is a separate vehicle. Toyota built the Majesta on a wider variant of the Crown platform with distinct body panels, a unique interior, and equipment that was either unavailable or not offered at any price on the Crown Royal Saloon. The JZS177 is the S170-generation Majesta, produced from 1999 to 2004, powered by the 2JZ-FSE direct injection 3.0L inline-six producing 217 HP at 5,600 rpm and 217 lb-ft at 3,600 rpm.
The Type A is the entry specification in the Majesta lineup. It still comes standard with features that defined the Majesta ownership experience above the Crown: head-up display projecting speed information onto the windshield, audio controls on the steering wheel, air swing vents, and cruise control. The original head unit is in perfect condition with no fading or cracking, which is uncommon on cars of this age.
Silver exterior. Grey wool interior. Work XS1 wheels with Bridgestone tires. 40,540 miles (65,207 km).
Mileage: 40,540 miles (65,207 km).
Interesting Facts
- The Crown Majesta was never positioned as a trim level of the Crown. From its introduction in 1991, Toyota gave it a separate model code, wider dimensions, distinct exterior and interior design, and a higher price point. The relationship between the Majesta and the Crown is closer to the relationship between the Lexus LS and the Lexus GS than to a standard trim hierarchy within a single nameplate.
- The 2JZ-FSE in the JZS177 uses Toyota’s D-4 direct injection system with a compression ratio of 11.3:1, significantly higher than the port-injected 2JZ-GE. The high compression ratio contributes to thermal efficiency but requires premium fuel and makes the engine sensitive to carbon buildup on the intake valves over time, since direct injection does not wash the valves the way port injection does.
- Work Wheels was founded in Japan in 1977 and became associated with Japanese motorsport and the JDM tuning scene through the 1990s and 2000s. The XS1 is a multi-spoke design that appeared on platforms like the Crown, Mark II, Chaser, and Aristo during this era, representing the understated performance aesthetic that defined JDM sedan culture of the period.
- The S170 Crown Majesta introduced a fully pillarless hardtop body structure, eliminating the B-pillar between the front and rear doors. This design gave the car a more open, flowing appearance when all windows were lowered and was a signature feature of Japanese flagship sedans from this era that was never adopted in European or American luxury cars of the same period.
About Us
Our team has worked with Japanese vehicles for over 25 years, first in Europe and Japan, now at JP-TRADE in Holiday, Florida. Mechanical preparation is done by Japanese mechanics at our prep station in Toyama, and we drive our cars before they reach a new owner. See our full process.
If you made it this far, here is a little bonus for you.
Why did Toyota build the Majesta as a separate car instead of just adding more equipment to the Crown?
By the late 1980s, Toyota understood that their Crown buyers had stratified into two distinct groups. One group wanted the Crown’s established status and reliability in a form that had not changed much. The other group wanted something that signaled they had moved beyond the standard Crown entirely. Adding more options to the Royal Saloon would have served the first group. It would not have served the second. The Majesta was the answer for the second group — a wider car, a distinct body, and equipment that could not be ordered into a Crown at any price. Toyota sold them alongside each other for decades, letting buyers self-select between them. The buyers who chose the Majesta knew exactly what they were communicating.



































